Wireless Mesh Network Repeater

The Wireless Repeater is used to bridge gaps or strengthen signals of our WiMAC mesh network The Ethernet Gateway is used as a communication point to expand controller communication to additional buildings. Build out a stronger wireless mesh network. Repeat the signal between WiMAC wireless door controllers where the signal may be weak. The ProdataKey Wireless Repeater is “plug ‘n play” and is used to extend the range of the wireless signal in areas where signal strength is weak, the signal often drops unexpectedly, or the signal needs to travel long distances between controllers. The repeater runs on the same frequency as our controllers, which is 2.4 GHz on the 802.15.4 channel. Wireless Repeaters become part of the wireless network and connect with each other or directly to an access control panel, door controller, or Cloud Node. A site ID and passphrase can be assigned to the repeater for exclusive use by a door controller or a Cloud Node. It features a one-mile perfect line-of-sight range, and a 450 ft. average for indoor applications. It is also AES 128-bit encrypted, meeting government-level security requirements.

Features:

• WiMAC  Wireless Device: (2.4 GHz / 802.15.4)
• Encryption: AES 128-bit
• Wireless Range: 1 Mile Line-of-Sight, 450 ft. indoor average
• Temperature: -4º ~ +140º F or -20º ~ +60º C
• Humidity: 0 - 95% relative humidity non-condensing
• Includes wall plug with 6ft cable
• 3.3V to 5V up to 500mA