Outdoor PoE-Powered 5-Port Gigabit Switch with PoE Passthrough / 4-Port PoE+ Extender

One IEEE 802.3bt (PoE++ / 4PPoE) PD PoE Port with 90 W power input, four IEEE 802.3at/af compliant PSE PoE ports, rainproof IP65, for Wall- and Pole-Mounting, adds up to 100 m (328 ft.) to PoE range.

This PoE-Powered 5-Port Gigabit Switch from Intellinet Network Solutions is designed to take power from a PoE switch or injector and pass both data and electrical power directly to a number of PoE-compatible devices via standard Ethernet cables. Equipped with five Gigabit ports, it can power up to four IP video cameras or wireless access points, drawing its own power from the PoE switch it is connected to, and deliver network speeds of up to 1,000 Mbps. Its high range and weatherproof housing are especially useful for outdoor surveillance camera deployments, where both power and data connectivity are critical. As opposed to traditional 1-port outdoor PoE extenders, this 4-output switch simplifies the expansion of your outdoor infrastructure as needed for easier scalability of your network.

Features:

• PoE-powered switch in a weatherproof housing, ideal for IP camera installations and other outdoor PoE applications
• Supports up to 90 W power input from an IEEE 802.3bt PoE++ injector or switch for a •PoE power budget up to 85 W
• Provides power and data for up to four PoE network devices
• IP65-rated, dustproof and waterproof, NEMA 4 enclosure
• Suitable for extreme operating temperatures of -40 to 80ºC (-40 to 176ºF)
• Doubles the connection distance between PoE source and device from 100 m (328 ft.) to 200 m (656 ft.)
• Power output up to 30 watts per port
• Supports IEEE 802.3at and IEEE 802.3af-compliant PoE devices (e.g., wireless access points, VoIP phones, IP cameras)
• Supports IEEE 802.3at/af detection and short circuit, overload, and high-voltage protection
• PoE power budget of 25 W through IEEE 802.3at connection and 10.4 W through IEEE 802.3af connection
• 10 Gbps switch fabric / switching capacity 10/100/1000 auto-sensing ports that automatically detect optimal network speeds
• Auto-MDIX and NWay auto-negotiation support on all RJ45 ports
• Supports jumbo frames up to 9216 Bytes
• Store and forward switching architecture
• Supports 802.3x flow control for full duplex and collision-based backpressure for half duplex mode
• Supports 2k MAC address entries with Auto-learning and Auto-aging
• Buffer memory of 2 Mbits
• Grounding point to protect equipment from external electrical surges
• PoE surge protection up to 4 kV in common mode and 2 kV in differential mode for all RJ45 ports +AE28Bracket with installation holes on the back, suitable for wall and pole mounting
• Fanless design
• Plug-and-play installation; no configuration required
• Fully NDAA-compliant
• Three-year warranty