Keri Systems NXT-4D-MSC is built for today’s IT environments. By using an existing TCP/IP network, controller cabling costs can be eliminated. Or, if building a new network, they can be reduced up to 50% over traditional hard-wired access systems by using inexpensive, shielded CAT-5 cable. The NXT-4D is designed to be extremely intelligent with little reliance on network traffic for decision making, allowing it to be thrifty with any network’s valuable bandwidth. With Ethernet functionality built directly into the controller. Keri’s propriatary MAC addressing scheme allows for reliable hardware discovery and true one-button autoconfiguration.
Features: - 4 Door/8 Reader Controller for Keri's Doors NXT product line On-board TCP/IP - no network adapters required
- Reduces controller cabling cost up to 50% over RS-485, Current Loop or other traditional networking schemes by allowing unshielded CAT5 cable
- Utilize existing LAN/WAN/Ethernet or pull your own dedicated CAT-5 Network
- Embedded MAC Address for One button AutoConfiguration
- Built-In Tamper Input
- Standard 4 PIN Block and RJ Jack built-in for network connection
- Re-assignable Inputs and Outputs
- Flash Memory for easy firmware upgrades
- Up to 64 Controllers (256 doors) and 1024 auxiliary I/O points per controller network
- 50,000 Cardholders, 10,000 Selectable Event Buffer per controller
- Locking Metal Enclosure (optional without)
- 96 Bit Encryption