Passive Infrared Motion Sensor

The PPIR motion sensor is designed to fit seamlessly in the corner of the room or alongside a wall/door. When the PIR senses motion it transmits an alarm notification to the panel. We recommend adding the motion sensor to a panel before mounting. The motion sensor can be installed using the provided adhesive and/or screws. We recommend using the provided screws for mounting as this method is more secure than using adhesive alone. The motion sensor requires one CR123A battery. When the battery is low, the panel displays a low battery icon next to the sensor in the Device List. The battery must be replaced within 7 days of the first low battery notification; if the battery is not replaced within 7 days, the sensor may not function properly. The PIR Motion Sensor has two sets of jumpers. One set of jumpers adjusts the Pet Immunity setting and the other set of jumpers adjusts the Sensitivity level. The pet immunity jumper allows you to select the desired immunity level based on the weight of the pet (the weight of a dog is used in this manual). Place the jumper over the desired pins. The sensitivity jumper allows you to select the desired sensitivity level. Place the jumper over the desired pins. When the system is armed and a person is detected by the Motion Sensor, there is a 3 minute "cool-off" period before the Motion Sensor will detect another person.

Features:

• Range up to 32.8 ft. (10m)
• Low & High Sensitivity Modes; Pet Friendly
• Long Range up to 820’ open air
• 1-Way Encryption, Complies UL 639,ULC S306
• Long Battery Life, 5yrs, typ.
• Includes CR123A Lithium Battery 3V
• Self-Stick Tape &/or optional screws for mounting