The 6808U is the latest intelligent addressable FACP (Fire Alarm Control Panel) from Silent Knight and is a direct replacement for the 6808/5808 FACP. The 6808U has one SLC (signaling line circuit) loop for connecting addressable detectors, which can support 159 System Sensor® SK sensors and 159 SK modules or 127 Hochiki® SD devices per loop. A common communications and annunciation link allows up to 17 panels to be connected via copper wire or fiber optic cable. A designated panel is configured as the communicator for all panels in the link for convenient single-point communications.
The built-in digital alarm communicator/transmitter (DACT) is dual technology, IP and POTS. The POTS transmits system status (alarms, troubles, AC loss, etc.) to a Central Station via the public switched telephone network. The IP communicator’s internet monitoring capability sends alarm signals over the Internet saving the monthly cost of two dedicated business telephone lines. Although not required, the secondary telephone line may be retained providing backup communication over the public switched telephone line. Optional cellular reporting is available.
The 6808U has eight onboard Flexput® circuits that can be configured as notification for auxiliary power. There are four types of Aux power available: door holder, constant power, resettable power and sounder sync power. The 6808U also has form-C trouble relay, and two programmable form-C relays, along with powerful features such as drift compensation, pre-trouble maintenance alert, a built-in sensor test to comply with NFPA 72 calibration testing requirements, and a calibration trouble alert.
The 6808U supports a variety of devices, including 6860, 5860, or 6855 remote annunciators, 5824 serial/parallel printer interface modules (for printing system reports), 5895XL power modules, and SK, SWIFT® wireless, or SD devices.
Features:
- Complies with UL 864 10th Edition
- Built-in support for up to 159 IDP/SK detectors and 159 IDP/SK modules or 127 SD SLC devices
- Eight Flexput circuits (3 amps max) for NAC outputs or auxiliary power
- Selectable strobe synchronization for Amseco®, System Sensor, Wheelock®, and Gentex® devices
- Built-in dual phone line, digital alarm communicator/ transmitter (DACT) with IP and optional cellular technologies
- 999 software zones and 999 output groups for flexible design options
- Four line LCD display with 40 characters per line
- Built-in USB interface for quick and easy programming
- Allows up to 20 SBUS devices
- Two programmable relays and one fixed trouble relay
- History file with 1,000 event capacity
- Can be surface or flush-mounted
English
Spanish
